SWITCH DISCONNECTORS FUSES – VCF

VISUALCOMPACT F is a range of fuse switch disconnectors suitable for making and breaking on load and disconnecting low voltage electrical circuits.
They are commonly used for the following purposes:

• main switch
• switch for motors
• disconnector
• safety switch

They are available in 5 sizes and 13 current ratings

_GENERAL CHARACTERISTICS

• Rated insulation voltage 1500v AC and 1500v DC
• 3 – 4 Poles available
• High breaking capacity (AC-22, AC-23, IEC 60947-3)
• High electrical and mechanical endurance
• Four break contacts
• Self cleaning contacts
• Both fuse terminals are not alive when the switch is in O
• position
• Suitable for DIN, BS and NFC fuses
• Contact position positively indicated by the handle
• Visibility of fied and moving contacts by means of windows
• Independent manual operation
• Neutral contact makes earlier and opens later than the
• phase contacts
• Solid neutral version available
• Suitable protection to prevent accidental touching of live parts
• Casing in self-extinguishing (V0-UL94), low hygroscopic
• and high mechanical resistance isolating material resistant
• to damp heat
• Wide range of accessories
• Rotary front operation by means of: external double
• insulated handle with door-interlock in ON position, IP65
• degree of protection. Padlockable with three padlocks in
• OFF position
• Direct handle (padlockable in OFF position on request)

_NORMAL SERVICE, MOUNTING ANDTRANSPORT CONDITIONS

• Storage and transport ambient temperature – 25°c + 55°c
• Working ambient temperature – 20°c + 40°c
• In case of higher ambient temperature (ta) consider the following derating formula:

• Relative humidity max 95%
• Rated frequency 50 – 60 hz
• Altitude max 2000 m a.s.l.
• Pollution degree 3 according IEC 60947-1
• Can be mounted in any position, for what concerns the
• positioning, please refer to the installation instructions
• Mounting in enclosure: in case of utilisation at full load and
• without adequate ventilation, ensure a volume of about 5
• times the volume of the switch
• Duty (IEC 60947-1): 8 hours; uninterrupted; intermittent
• 60% class 30; temporary; periodic.
• For different operating conditions, please contact the
• manufacturer.

_CONFORMITY TO STANDARDS

IEC 60947-1|IEC 60947-3|UNI EN 60947-1|UNI EN 60947-3

_CERTIFICATES AND APPROVALS

KEMA | RINA | ENEL code 13.32.23 | A2A | CESI | IENGF | EAC