Distribution Boards with Transparent Window IP66

Facility: Optimization of interior spaces by leaving large areas
of wiring, facilitates wiring and maintenance operations.
All windowed enclosures are equipped with hinged front
(installable both on the right and left side) which gives full access
to the whole board.
Safety: The interlocked sockets are equipped with rear
panel isolator switches AC3-AC23A which guarantees:
– load break disconnect at nominal current
– insulation in OFF position, thanks to safe distances
between contacts
– 10.000 switching cycles at full load.
Guarantee: topTER has passed several tests,
i.e. protection degree IP, glow wire test, flmmability, vibrations, low
temperatures, salty atmosphere and impacts .
Prevention: All control gear windows are fited with locking device
to avoid unauthorized access.
All interlocked sockets can be locked both at position 0 and 1.
Control: All industrial sockets IEC60309 (the interlocked and not
interlocked) can be equipped with additional micro switch contacts that
allow a remote signaling of plug insertion.
Easy to equip: The inside of the board has been designed in order to
give full freedom to the users to install internal
parts (DIN rail, equipotential bars, etc.) without
need for additional drilling. All boards can be
also set for mobile use with simple addition
of some parts (support parts, handles, etc.).